| Page1 | Page2 | Page3 |

metal jacket

JBD - 85 METAL JACKET 

  It is made from Asbestos mill -board, Expanded Graphite, Ceramic etc. filler, cnvered with thin metal jacket, such as stainless steel, carbnn steel, copper etc. special used in sealing spots of thermal exchanger, pressure vessel, etc.

NO.

Description

JBD-85(S)

Single-jacketed

JBD-85(W)

Wholly-jacketed

JBD-85(C)

Corrugated-jacketed

JBD-85(R)

Corded-jacketed

JBD-85(D)

Double-jacketed

Another kinds jacketed
PTFE Cushion Gasket

 PTB - 85 PTFE CUSHION GASKET

  PTFE Cushion Gasket consists of Asbestos. Asbestos Rubber, etc. cushion material having exposed surface covered with PTFE envelope. Depends on excellent corrosion resistance and compression resilient. It is widely used in strong alkalis. Cryogenic fluids, oxygen, chlorine gas, and disallow- able polluted medium, etc.

NO

Description

PTB-85(V)

V Type,PTFE dise in center from out side.

PTB-85(U)

U Type,PTFE tape heat sealed at one joint.

PTB-85(L)

V Type,PTFE sheet mashine cut to envelope form
PTFE cut gasket

PTP - 80 PTFE CUT GASKET 

  This products are machined or cut from PTFE Rods, pipes and sheets, such as V type gaskets, plain gaskets, ball valve ' s washer, etc. It has several outstanding characteristics such as chemical innersoles, moisture and weather resistance excellent dielectric, etc.

　

NO

Description

Temperature

Pressure

PTP-80(A)

Pure PTFE Cut Gasket

-100~100

100

PTP-80(B)

GIASS FIber 20% filled PTFE Cut Gasket

-150~150

100

PTP-80(C)

Special filled PTFE Cut Gasket

-150~200

30
Glass textile fiber

Glass FIBER Textile PRODUCTS

     Glass textile fiber standout among the different organic and inorganic fibers as the most widely useable alternative to asbestos.
     Glass fiber textile can be continuous use at temperature of up to 450c, being able to endure up to 600. If exposure is short, they are fire proof, resistant to steam and most chemical agents and have excellent tensile strength.
GLASS FIBER CLOTH
Thickness(mm) Width(mm) Length(m) Weight per m2 g/m2
1.6 1000 30-80 1050
3.2 1000 30-80 1950
GLASS FIBER RIBBON
Thickness(mm) Width(mm) Length(m) Weight per m2 g/m2
1.5 20-200 30-50 1000
1.6 20-200 30-50 1100
3.0 20-200 30-50 1900
3.2 20-200 30-50 2000
Ceramic fiber textiles

TQ - 94 CERAMIC FIBER TEXTILES 

  The products are made of the high quality aluminosilicate refractory fiber (standard RT) spun and weave through a special technological process. Ceramic fiber is a type of new heat insulation refractory and inorganic materials. The products have many advantages, such as light weight, resistant to high temperature, hot shake, minor in heat capaciQ, good heat insulation, resistant to acid and alkali and free of poison etc. It can also be processed into a wide range of heat insulation materion materials with quite high tensile strength and toughness.
NO Name of aticle Reintorced meterial Model Specification
1 Yam Inconel wire Glass fitament SSYS SSYG 500-2000TEX
2 Cloth Inconel wire Glass fitament SSCS SSCG W 1000mm T 2-3mm
3 Tape Inconel wire Glass fitament SSTS SSTG W 25-100mmT 2-3mm
4 Twisted Rope Inconel wire Glass fitament SSTRS SSTRG Q3-25mm
5 Round braided rope Inconel wire Glass fitament SSTBS SSTBG Q8-25mm
6 Square braided rope Inconel wire Glass fitament SSTBS SSTBG Q8-25mm